Encore
2000 Refit and Updates
Specs & Cost (estimated)

Fuel Tanks (2 stainless – 100 gals. total), lines, filters, relay teak decks
           $5,000

Sails –
  Main ($2,500)
   Lines–Blocks–Tackle–Vang ($1,000)
   Genoa ($2,000)
   RollerFurl ($3,000)
   Spinnaker and accompaniments ($2,000)
  Winches ($4,500)
             $15,000

New Rig – Custom Aluminum Mast & Boom – Stays – Boomkin – inner forestay with
        highfield lever insulated backstay
            $15,000

Running Rigging – 12-1 Mainsheet, Halyards, custom mainsheet track
            $3,000

Yanmar – Diesel Engine – Transmission – Gauges
            $10,000

Maxi Prop – new shaft, stuffing box, muffler, exhaust system
            $4,000

Electronics – 

  Compass – (4)-1 Electronic, GPS Color chartplotter, Fathometer
            $20,000
  Radar, Wind direction and speed (2), Network system 
  Autohelm, VHF, AM-FM CD stereo with 4 speakers, Loran 

Reefer – Custom stainless, large with rwo sections, remote control
            $3,000

Espar Heat – with cabinetry and vents
            $2,000

Electrical – Rewire entire boat 110 & 12, custom electrical panels batteries, 
                  switches, lights, inverter, battery charger, batteries, lights, Link Battery 
                  Monitor
                         $15,000

Carpentry – Interior rebuilt, customized, upgraded, caned locker doors, cabinets,
                   windshields replaced, matching mahogany helm and navigator seats,
                   navigation station, corian counter tops
                         $40,000

Paint and Varnish – entire boat inside and out
            $15,000

Water Systems – new tanks, pumps, lines, sinks, faucets, salt water system, deck
             wash down system, shower, hot water heater, thru hulls
            $5,000

Tank Tenders & Master Switchpanel for water and fuel tanks
            $1,000

New Bow Sprit/Windlass – Anchors – CQR – Freedom – chain, rhode
           $10,000

Kenyon stove, aluminum propane tanks, propane remote, propane locker, microwave
            $2,500

Hatches Bomar – V berth, galley, cockpit sole
            $3,000

Sanitary System – Shipper head, new thru hulls, stainless, holding tank, macerator
            $3,500

Bottom re-caulked, painted (should not need re-caulking for another 15-20 years)
            $7,500

Decks and cabin tops stripped, glassed and epoxyed, trim replaced, stanchon blocks
            $10,000

New cushions, sailcovers
            $2,500

Bilge pumps, hose, thru hulls, control panel, wiring
            $1,000

Dyer Dinghy and equipment
            $2,000

Stanchons, Lifelines, Gate
............$2000

Location:  South Bristol, Maine
                Gammage Shipyard
1907 Buena Vista Circle Wilmington, North Carolina 28411-7892
Order Line (910) 686-9591 Fax Line (910) 686-4452
General Information (910) 686-4816

[email protected]

Have a genealogy friend or a history-buff relative?
 Check Out Broadfoot's
..SoldierSearch.com